SWEP HD+ Digital Signage Players

Designed for purpose Digital Signage Player

The SWEP-HD+ is small (300mm x 195mm x 50mm) with a black powder coated steel construction, providing industrial reliability and ease of mounting. The use of the high specification, fan-less, Intel Atom processor further increases reliability with the only moving part in the system being the high specification hard drive. An additional benefit is that the unit is also virtually silent in operation.

Independent VGA and DVI-D outputs, both capable of supporting resolutions from 800x600 up to FULL HD (1920x1080) and more, allows the unit to connect to almost every electronic screen technology available. In extended desktop mode resolutions of 3840x1080 can easily be supported (as can portrait mode operation).

Unattended operation capabilities are supported with bios options for ‘boot on power up’, ‘boot after power fail’, Wake-on-Lan, RTC wake up (turn on at specific times of day).

For data transfer the SWEP-HD+ features gigabit Ethernet and 4 USB 2.0 ports.

Pre-installed Software

As well at SWEP the HD+ comes pre-installed with a selection of ImageFlyer screen layouts and a ‘getting started’ QuickChange installation making commissioning your digital signage system fast and simple. Using just your logo and 3 digital photos you can set up 20 screen layouts, perfectly branded and colour matched for your organisation, in less than 5 minutes. Every SWEP also comes pre-installed with the full Sedao software suite of ImageFlyer, RollerWriter, RSSWriter, Content Manager (licenses may be required)

For your convenience Sedao also pre-install a complete suite of plugs-ins including the most commonly used software Codec’s, PowerPoint Viewer, remote desktop viewer (VNC), Flash player and a library of ‘flash animation’ analogue and digital clocks; licensed for your free use courtesy of digital artist www.adamdorman.com.

Technical Specification

Operating System: Windows XPe
Main Board: Intel® Atom™ N270 1.6GHz CPU onboard
Chipset 945GSE + ICH7M
Intel® Graphic Engine GMA 950
Main Memory: 1 x SO-DIMM, DDR2 1 GByte
I/O Interface-Front: 1 x LED Power-On
1 x LED Storage
I/O Interface-Rear: 1 x DB9 RS232 COM port
1 x DB15 VGA port
1 x DVI-D port
4 x USB 2.0 port
1 x RJ45 with LEDS for 10/100/1000 Mbps Ethernet
12VDC Power In
Storage: 1 x 2.5" SATA 80Gbyte HDD
Dimensions: 300mm (W) x 195mm (D) x 50mm (H) (without mounting bracket)
Power Input: 1 x External 60W AC/DC power adaptor (In: 90VAC~264VAC. Out: 12VDC)
Environment: Operating Temperature: Ambient with air flow from 0°C ~ 40°C (HDD inside)
Storage Temperature: -20°C ~ 60°C, Humidity: 10% ~90% @40°C
Certification: CE approval, FCC Class A
Extras: Wall mounting bracket provided free of charge

Rear Projection of Unit

Click to view rear projection full screen
Click to open rear projection fill screen

Options

The SWEP-HD+ is provided, as standard, with installed but unlicensed Sedao software suite for use with our unlimited site licensing system. For single player operation the SWEP-HD can be supplied with fully licensed software.

Hardware options include

Part Codes (no software licenses) Part Codes (Fully licensed software)
SWEP-HD SWEP-HD-IF
SWEP-HD-Video SWEP-HD-Video-IF
SWEP-HD - Wi-Fi SWEP-HD-Wifi-IF

Please note: When purchasing SWEP HD+ units for use with an unlimited site license please ensure you enter your site license software keys before installing players.

Product specification subject to change without notice